ANViL ROOF-TEC Fibered 100% Elastomeric Roof Coating is an acrylic roof coating reinforced with interlocking fibers that provide superior bridging of the coating over seams and small separations. It contains interlocking fibers that increase the coatings durability to with stand weathering. ANViL ROOF-TEC Fibered exceeds performance of similar coatings of this type for adhesion and longevity. Its brilliant white finish not only beautified, but reflects up to 90% of the sunΓÇÖs rays lowering heat buildup and reducing air conditioning costs. Stays brighter longer for it contains a fungicide to resist mildew growth on the product film. Great for mobile home roof protection. Do not use on flat roofs. Roofs must have adequate pitch to allow water to run off. Apply with roller or airless sprayer. Airless pump set at 1,500 to 2,000 PSI delivering 1 Gal. to 2 Gal. per minute using spray tip of 0.026-0.035. The hose should be at least 3/8 in. Dia with gun filters removed. Allow 24-hours between coats. Apply only when temperatures are above 50F and when humidity is below 95% for the next 24 rain free hours. If the roof is hot or day is windy, apply a mist-spray with water just before application to avoid sealer from drying too fast. 2 or 3 (for warranty) full coats at the rate of 80 sq. ft. per Gal. are needed for proper sealing. Apply each coat perpendicular to the last. Do not thin product. Apply at package consistency.
- Superior elongation of thermal cycling (Movement of metal roofs)
- Seals minor cracks and helps stop leaks
- Use on a variety of roof types residential, commercial, industrial cool roofs
- Bridges hair-line cracks
- Thick and seamless protection